色婷婷综合成人av_99久久精品国产毛片_成人一区二区在线_国产91丝袜在线播放_久久人人爽人人爽人人片av免费_欧美伊人

意大利Gibitre Instruments   
Gibitre公司建立于1979年，在橡膠工業領域有著將近30年豐富經驗。2001年，Gibitre成立獨立的儀器公司（Gibitre Instruments），并且專注于橡膠檢測儀器的生產研發。

時至今日，Gibitre公司的產品已經成為全球頂級的橡膠檢測設備。而且產品種類齊全，涵蓋硫化儀、門尼粘度計、拉力試驗機、臭氧測試儀、低溫測試儀（TR和脆性）、硬度計、耐磨試驗機、樣品制備設備等一整套橡膠檢測儀器。Gibitre儀器現已被廣泛應用于密封件、膠管、膠帶、混煉膠和輪胎等企業，滿足全球客戶對高端橡膠檢測設備的需求。

Gibitre was founded in 1979 and as a company dealing with a wide range of activities in the rubber industry including rubber compounding, rubber moulding and rubber control instruments production.
Gibitre Instruments was created as a separate company in 2001.

Aim
The aim of Gibitre Instruments S.r.l. is the development, production and marketing on world scale of a wide range of instruments for laboratory rubber testing.
The range of the produced instruments is the most various in those produced by the world competitors and this, together with the continuous use of the instruments by the other production unities of the group, is a guarantee for a continuous improvement of the company Know-how for the problems of the rubber control.

Objective
The goals that the company wants to achieve, for a better satisfaction of the customer, are:
Continuous technological improvement of the product by means of:

* Continuous adjustment to technologic innovation and standards
* Progressive computerization of the most representative instruments of our range
* Progressive production costs reduction to keep the present optimal ratio cost/performance

Continuous improvement of the service by means of:
* Progressive reduction of the delivery time
* Progressive reduction of the technical intervention time
* Development of innovative forms for technical assistance/calibration

Development of products
Gibitre Instruments continuously develops new instruments in conformity with international standards and updates existing products to meet the new needs of the customers
Mechanical design of the products is made using 3D CAD system
Mechanical production of parts is made partially inside the company (prototyping – special parts) and partially by specialized companies
Software Development is made inside the company in cooperation with a software house specialized in software development software
Electronic cards are developed and produced in cooperation with external companies specialized in sensors management.
Incoming control and a complete testing of finished products ensures that the quality of Gibitre Products meets the highest standards.

Gibitre distributors
Gibitre Insruments has been selecting distributors for its products all around the world.
Distributors are chosen considering their technical knowledge of the rubber and plastic technology and market.
Continuous training is provided to the distributors to improve their capability to answer to customers requests.
Please refer to the web site www.gibitre.com for the updated list of distributors of Gibitre Instruments’s products.

Technical assistance & calibration
Gibitre Instruments has developed a Technical Assistance Service that provides:
Periodic calibration made using calibration instruments with traceability to primary standards which are certified by an accredited centre and issuing of relevant certificates
Repairing of anomalies on installed instruments
Statistical analysis of the found anomalies to take the opportune corrective actions In some countries the assistance service is done directly from the main office whereas in the others it is delegated through technical training of local personnel.
Specific training programs are prepared both for internal technician and for technicians of agencies providing maintenance and calibration service.
All Gibitre customers can contact directly the free technical phone and e-mail service.
Delivery of spare parts in case of failure is normally made within 24 hours from problem detection.
The efficiency of this service is continuously improved according to the statistical analysis of anomalies.

Accredited SIT calibration service
GibItre Instruments' metrological laboratory was appointed as an accredited SIT calibration centre in March 2005.
Calibration is carried out on the basis of SIT Accreditation No. 182.
The quality system of the SIT laboratory is in compliance with UNI EN ISO/IEC 17025 Standard.
The measures Gibitre Instruments is accredited for are IRHD (Micro and Normal) according to ISO 48 and Shore A and D according to ISO 868.