德國Femto低頻電壓放大器DLPVA-100-BUN-S
價 格：詢價
產 地：德國更新時間：2020-10-30 09:09
品 牌：Femto型 號：DLPVA-100-BUN-S
狀 態：正常點擊量：2871
400-006-7520
聯系我時，請說明是在上海非利加實業有限公司上看到的，謝謝！
聯 系 人：
上海非利加實業有限公司
電 話：
400-006-7520
傳 真：
400-006-7520
配送方式：
上海自提或三方快遞
聯系我時請說在上海非利加實業有限公司上看到的,謝謝！
Offset Drift
The temperature drift of the input offset voltage is one of the decisive characteristics for the quality of a DC voltage amplifier. FEMTO Voltage Amplifiers have the DC performance of precision amplifiers. Therefore, even the 100 dB gain is well suited for DC-coupling without the need for permanent offset voltage adjustments.
Bandwidth
The bandwidth of an ideal variable gain amplifier is independent of the gain setting which is very important for measuring fast signals and pulses. The bandwidth of FEMTO`s DLPVA Amplifiers remains constant at 100 kHz (-3 dB) up to the highest gain setting. Wideband noise can be reduced by switching the upper cut-off-frequency to 1 kHz.
Controls
Parameters, e.g. gain settings, bandwidth etc. can all be controlled by local switches directly on the amplifier. Operation is straightforward and the chosen gain setting is displayed by LEDs. For remote control, each switch is provided with a corresponding TTL-Bit. Mixed operation is also possible.
Flexibility
Six different DLPVA models offer a high degree of flexibility. Our customers can choose either a single ended or a true differential input. The input impedance is 1 MΩ or lower for our bipolar models and an exceptional high 1 TΩ for our FET models allowing measurements of signals from very high impedance sources. Finally the noise is as low as 0.4 nV/√Hz for the model DLPVA-100-BUN-S.
產品參數
? Switchable Gain up to 100 dB (x 100,000)
? Bandwidth DC to 100 kHz
? DC-Drift 0.6 μV/°C
? Input Noise down to 0.4 nV/√Hz
? Switchable AC/DC-Coupling
? Local and Remote Control
? Input Impedance up to 1 TΩ
滬公網安備31011502016460號
