PRTF-10-2-100-1/4-12-E-SB_PRTF-10-2-100-1/4-18-E-S
價 格:詢價
產 地:美國更新時間:2020-10-26 19:30
品 牌:歐米茄型 號:PRTF-10-2-100
狀 態:正常點擊量:1578
上海非利加實業有限公司
聯 系 人: 上海非利加實業有限公司
電 話: 400-006-7520
傳 真: 400-006-7520
配送方式: 上海自提或三方快遞
聯系我時請說在上海非利加實業有限公司上看到的,謝謝!
PRTF-10-2-100-1/4-12-E-SB_PRTF-10-2-100-1/4-18-E-SB通用RTD探頭OMEGA
直探頭組件,電纜直接連接到傳感元件(無過渡接頭)
包含精密100歐姆B***DIN鉑薄膜元件
溫度范圍:-50至500℃
具有空間限制的應用程序的緊湊設計
直徑為1/4”、3/16”、4.5 mm和6 mm,各種長度(注:1/8”或3 mm直徑不適用)
2線、3線或4線玻璃纖維絕緣護套不銹鋼電纜
提供給IEC60751/ASTM E-1137色碼的所有傳感器
也可與PFA絕緣電纜(***高260攝氏度)、玻璃纖維絕緣和護套電纜-GG或玻璃纖維電纜與BX膠管(-BX)。玻璃纖維電纜的***高溫度為500℃,見個別產品表
產品參數
PRTF-10-2-100-1/4-12-E-SB_PRTF-10-2-100-1/4-18-E-SB通用RTD探頭OMEGA
這些通用鉑電阻式溫度檢測器探頭包含歐米茄的DIN鉑薄膜電阻式溫度檢測器元件,直接連接到玻璃纖維絕緣、玻璃纖維護套、不銹鋼超繞電纜上,無需延長線或金屬過渡配件。這種設計使得探頭更加緊湊可靠,空間限制是其中的一個因素。
注:本產品不適用于1/8英寸或3毫米探頭直徑。如果需要直徑為1/8“或3 mm的探頭,建議使用帶過渡接頭的PRTF-11或帶方形鎖緊金屬軟管的PRTF10-E-BX。
本產品采用玻璃纖維絕緣護套電纜。
適用于玻璃纖維絕緣電纜和方形鎖定軟管。
產品介紹
PRTF-10-2-100-1/4-12-E-SB_PRTF-10-2-100-1/4-18-E-SB通用RTD探頭OMEGA
Straight Probe Assembly, Cable Runs Directly to the Sensing Element (No Transition Fitting)
Contains a Precision 100 Ohm Class B DIN Platinum Thin Film Element
Temperature Range: -50 to 500oC
Compact Design for Applications with Space Restrictions
Available in 1/4", 3/16", 4.5mm and 6mm Diameters in Various Lenghts (Note: Not Avaliable in 1/8" or 3mm Diameters)
2-, 3- or 4-Wire Fiberglass Insulated and Jacketed Cables with Stainless Steel Overbraid
All Sensors Supplied to IEC60751/ASTM E-1137 Color Codes
Also Available With PFA Insulated Cables (260oC Maximum Temperature), Fiberglass Insulated and Jacketed Cables -GG) or Fiberglass Cables With BX Amored Hose (-BX). Fiberglass Cables have 500oC Maximum Temperature, See Individual Product Sheets
These general purpose Platinum RTD probes contain Omega's DIN Platinum thin film RTD elements connected directly to a fiberglass insulated, fiberglass jacketed, stainless steel overbraided cable without the need for extension wires or metal transition fittings. This design makes for a more compact and reliable probe where space limitations are a factor.
Note: This product is not available in 1/8" or 3mm probe diameters. If a 1/8" or 3mm diameter probe is required, the PRTF-11 with transition fitting or the PRTF10-E-BX with square locked metal hose are recommended.
For this product with a PFA insulated and jacketed cable
For this product with a fiberglass insulated and jacketed cable.
For this product with a fiberglass insulated cable and square locked hose.